Let op! Vrijdag 10 mei is Bus gesloten. Er vinden geen leveringen plaats.
FILTERS WEERGEVEN

Lichtgewicht ontwerp met geïntegreerd handvat en draaglus voor maximaal draaggemak | Gesloten hydraulisch systeem (rubber balg) voorkomt vervuiling en zorgt ervoor dat de pomp in elke positie kan worden gebruikt | Pomp met krachtige 0,37 kW motor, 28 V lithium-ion accu en hoge olieopbrengst en lange levensduur | Zeer sterke met glasvezel versterkte behuizing van composietmateriaal voor een lange levensduur bij gebruik in zware omstandigheden | Dankzij de snoerloze technologie is er geen risico meer op struikelen, in tegenstelling tot gewone elektrische pompen.

Enerpac Hydraulische accupomp XC-1201ME

per

Lichtgewicht ontwerp met geïntegreerd handvat en draaglus voor maximaal draaggemak | Gesloten hydraulisch systeem (rubber balg) voorkomt vervuiling en zorgt ervoor dat de pomp in elke positie kan worden gebruikt | Pomp met krachtige 0,37 kW motor, 28 V lithium-ion accu en hoge olieopbrengst en lange levensduur | Zeer sterke met glasvezel versterkte behuizing van composietmateriaal voor een lange levensduur bij gebruik in zware omstandigheden | Dankzij de snoerloze technologie is er geen risico meer op struikelen, in tegenstelling tot gewone elektrische pompen.

Enerpac Hydraulische accupomp XC-1202ME

per

Enerpac accu 5Ah 28Volt XC28V5

Enerpac accu 5Ah 28Volt XC28V5

per

Enerpac accu 28v xc28v

Enerpac accu 28v xc28v

per

The Lithium-Ion battery provides superior run time, even under extreme job site conditions, running approximately 50 cycles on a RC1006 and approximately 90 cycles on a RC504 cylinder on a single charge. EUAU battery model is for Europe, rest of the world.


Enerpac accu Li-Ion 82V 4Ah ZC82V4EUAU

per

Enerpac acculader 230v ZC230VC

Enerpac acculader 230v ZC230VC

per

Enerpac beschermkooi tbv XC-TW/XC XCRCTK

Enerpac beschermkooi tbv XC-TW/XC XCRCTK

per

  • Portable battery pump for torque applications
  • This portable pump is perfect for remote locations, sites that do not have access to power or where trip hazards are a concern. The interactive pendant allows the user to set and clear pressure and operate in manual or auto-cycle mode.
  • The pump has an easily accessible user adjustable valve for precise pressure control
  • Ideal for maintenance bolting applications requiring portability and convenience
  • Interactive pendant provides visual and vibratory feedback of pump operation
  • Superior run-time with 5Ah, 28V battery
  • 6 metres detachable pendant control
  • 100 mm glycerin-filled gauge for easy viewing
  • Bladder reservoir allows pump to be used in any position
  • High-strength fiberglass reinforced composite housing provides superior durability in demanding job site environments
  • Integrated handle and carrying strap for portability
  • The following wrenches are ideal for use with the XC Cordless Torque Wrench Pump: S1500X, W2000X, S3000X, W4000X. Larger wrenches will work with the pump, battery run time and application speed will be impacted.
  • Fasteners torqued on one charge: 32 fasteners torqued with an S3000X torque wrench on a 60 mm Nut AF, 38 mm Stud, at 330 bar and 2035 Nm
  • Fasteners torqued on one charge: 52 fasteners torqued with an W2000X torque wrench on a 60 mm Nut AF, 38 mm Stud, at 350 bar and 1356 Nm
  • The weight includes oil, no battery (battery weight: 2.4 lbs)

Enerpac hydraulische accupomp 115v 2 l XC1502TB

per

  • Portable battery pump for torque applications
  • This portable pump is perfect for remote locations, sites that do not have access to power or where trip hazards are a concern. The interactive pendant allows the user to set and clear pressure and operate in manual or auto-cycle mode.
  • The pump has an easily accessible user adjustable valve for precise pressure control
  • Ideal for maintenance bolting applications requiring portability and convenience
  • Interactive pendant provides visual and vibratory feedback of pump operation
  • Superior run-time with 5Ah, 28V battery
  • 6 metres detachable pendant control
  • 100 mm glycerin-filled gauge for easy viewing
  • Bladder reservoir allows pump to be used in any position
  • High-strength fiberglass reinforced composite housing provides superior durability in demanding job site environments
  • Integrated handle and carrying strap for portability
  • The following wrenches are ideal for use with the XC Cordless Torque Wrench Pump: S1500X, W2000X, S3000X, W4000X. Larger wrenches will work with the pump, battery run time and application speed will be impacted.
  • Fasteners torqued on one charge: 32 fasteners torqued with an S3000X torque wrench on a 60 mm Nut AF, 38 mm Stud, at 330 bar and 2035 Nm
  • Fasteners torqued on one charge: 52 fasteners torqued with an W2000X torque wrench on a 60 mm Nut AF, 38 mm Stud, at 350 bar and 1356 Nm
  • The weight includes oil, no battery (battery weight: 2.4 lbs)

Enerpac hydraulische accupomp 230v 2 l XC1502T

per

  • Portable battery pump for torque applications
  • This portable pump is perfect for remote locations, sites that do not have access to power or where trip hazards are a concern. The interactive pendant allows the user to set and clear pressure and operate in manual or auto-cycle mode.
  • The pump has an easily accessible user adjustable valve for precise pressure control
  • Ideal for maintenance bolting applications requiring portability and convenience
  • Interactive pendant provides visual and vibratory feedback of pump operation
  • Superior run-time with 5Ah, 28V battery
  • 6 metres detachable pendant control
  • 100 mm glycerin-filled gauge for easy viewing
  • Bladder reservoir allows pump to be used in any position
  • High-strength fiberglass reinforced composite housing provides superior durability in demanding job site environments
  • Integrated handle and carrying strap for portability
  • The following wrenches are ideal for use with the XC Cordless Torque Wrench Pump: S1500X, W2000X, S3000X, W4000X. Larger wrenches will work with the pump, battery run time and application speed will be impacted.
  • Fasteners torqued on one charge: 32 fasteners torqued with an S3000X torque wrench on a 60 mm Nut AF, 38 mm Stud, at 330 bar and 2035 Nm
  • Fasteners torqued on one charge: 52 fasteners torqued with an W2000X torque wrench on a 60 mm Nut AF, 38 mm Stud, at 350 bar and 1356 Nm
  • The weight includes oil, no battery (battery weight: 2.4 lbs)

Enerpac hydraulische accupomp 230v XC1502TE

per

  • The Enerpac ZC-Series pump combines the performance of an electric pump with the convenience and portability of a battery pump. This quiet, cordless solution is ideal for applications where emission and noise are a concern, or when electricity or air is not readily available.
  • Power for the pump is supplied by a rechargeable 82V lithium-ion battery. The lithium-ion battery is capable of providing impressive run times, even under extreme job site conditions.
  • High-flow cordless solution saves users time and money by eliminating the need for using a generator and extension cords.
  • Brushless 1,0 kW motor and 3 stage pump maximizes pump and tool productivity while minimizing heat buildup and downtime.
  • The Lithium-Ion battery provides superior run time, even under extreme job site conditions, running approximately 50 cycles on a RC1006 and approximately 90 cycles on a RC504 cylinder on a single charge.
  • Convenient 3 m pendant cord for hassle-free operation.
  • All models meet CE safety requirements and all TUV requirements.
  • Weight includes oil.

Enerpac hydraulische accupomp 230v ZC3308JE

per

  • The Enerpac ZC-Series pump combines the performance of an electric pump with the convenience and portability of a battery pump. This quiet, cordless solution is ideal for applications where emission and noise are a concern, or when electricity or air is not readily available.
  • Power for the pump is supplied by a rechargeable 82V lithium-ion battery. The lithium-ion battery is capable of providing impressive run times, even under extreme job site conditions.
  • High-flow cordless solution saves users time and money by eliminating the need for using a generator and extension cords.
  • Brushless 1,0 kW motor and 3 stage pump maximizes pump and tool productivity while minimizing heat buildup and downtime.
  • The Lithium-Ion battery provides superior run time, even under extreme job site conditions, running approximately 50 cycles on a RC1006 and approximately 90 cycles on a RC504 cylinder on a single charge.
  • Convenient 3 m pendant cord for hassle-free operation.
  • All models meet CE safety requirements and all TUV requirements.
  • Weight includes oil.

Enerpac hydraulische accupomp 230v ZC3408JE

per

Alle prijzen zijn excl. wettelijke btw en excl. evt. Verzending.