Bearing Separator has wedge shaped edges for placing puller behind hard to reach bearings, gears, etc., where clearance prevents direct application of grip puller arms.
The Bearing Separator should be used with the Cross Bearing Puller.
Made of high strength steel alloy
Wedge-shaped edges allow removal of the most hard-to-grip components
Easily adapted to Cross Bearing Pullers for fast and efficient removal of the most difficult parts
Bearing Separator has wedge shaped edges for placing puller behind hard to reach bearings, gears, etc., where clearance prevents direct application of grip puller arms.
The Bearing Separator should be used with the Cross Bearing Puller.
Made of high strength steel alloy
Wedge-shaped edges allow removal of the most hard-to-grip components
Easily adapted to Cross Bearing Pullers for fast and efficient removal of the most difficult parts
Bearing Separator has wedge shaped edges for placing puller behind hard to reach bearings, gears, etc., where clearance prevents direct application of grip puller arms.
The Bearing Separator should be used with the Cross Bearing Puller.
Made of high strength steel alloy
Wedge-shaped edges allow removal of the most hard-to-grip components
Easily adapted to Cross Bearing Pullers for fast and efficient removal of the most difficult parts
Bearing Separator has wedge shaped edges for placing puller behind hard to reach bearings, gears, etc., where clearance prevents direct application of grip puller arms.
The Bearing Separator should be used with the Cross Bearing Puller.
Made of high strength steel alloy
Wedge-shaped edges allow removal of the most hard-to-grip components
Easily adapted to Cross Bearing Pullers for fast and efficient removal of the most difficult parts
LGH-Series Pullers provide the same safety and ease of use as their mechanical counterparts, with the pulling force applied by a standard 700 bar hydraulic cylinder.
Quickly and easily mount on a wide range of applications
Turning the puller handle locks the jaws onto the application, allowing the desired object to be pulled free when the spindle is turned.
Hydraulically applied pulling force increases pulling capacity, reducing operator fatigue
Lock-on jaws offer a secure grip for safe and easy operation
Synchronous jaw movement enables entire pulling job to be performed by a single operator
LGH-Series Pullers MUST be used with a point protector if the shaft end does not contain a drilled center hole. One point protector is included with every puller.
Always wear safety goggles and gloves while using pullers.
LGH-Series Pullers provide the same safety and ease of use as their mechanical counterparts, with the pulling force applied by a standard 700 bar hydraulic cylinder. (Cylinder not included)
Quickly and easily mount on a wide range of applications
Turning the puller handle locks the jaws onto the application, allowing the desired object to be pulled free when the spindle is turned.
Hydraulically applied pulling force increases pulling capacity, reducing operator fatigue
Lock-on jaws offer a secure grip for safe and easy operation
Synchronous jaw movement enables entire pulling job to be performed by a single operator
LGH-Series Pullers MUST be used with a point protector if the shaft end does not contain a drilled center hole. One point protector is included with every puller.
Always wear safety goggles and gloves while using pullers.
LGH-Series Pullers provide the same safety and ease of use as their mechanical counterparts, with the pulling force applied by a standard 700 bar hydraulic cylinder.
Quickly and easily mount on a wide range of applications
Turning the puller handle locks the jaws onto the application, allowing the desired object to be pulled free when the spindle is turned.
Hydraulically applied pulling force increases pulling capacity, reducing operator fatigue
Lock-on jaws offer a secure grip for safe and easy operation
Synchronous jaw movement enables entire pulling job to be performed by a single operator
LGH-Series Pullers MUST be used with a point protector if the shaft end does not contain a drilled center hole. One point protector is included with every puller.
Always wear safety goggles and gloves while using pullers.
All LGHMS-Series Master Puller Sets include an LGH-Series Puller, a Cross Puller, a Bearing Separator, a Bearing Cup Puller, a detachable Hollow Cylinder, a hose, a gauge and a pump
LGH-Series Pullers provide the same safety and ease of use as their mechanical counterparts, with the pulling force applied by a standard 700 bar hydraulic cylinder.
Quickly and easily mount on a wide range of applications
Hydraulically applied pulling force increases pulling capacity, reducing operator fatigue
Lock-on jaws offer a secure grip for safe and easy operation
Synchronous jaw movement enables entire pulling job to be performed by a single operator
LGH-Series Pullers MUST be used with a point protector if the shaft end does not contain a drilled center hole. One point protector is included with every puller.
Enerpac cylinders and pumps can be operated to 700 bar, but should not be operated past 350 bar when using the Cross Bearing Puller Set tools.
Always wear safety goggles and gloves while using pullers.
WARNING! Enerpac hydraulic pullers can be operated upto 700 bar. When using accessories, hydraulic pressure for this puller MUST BE
LIMITED to maximum capacities of 7 US-ton (75 kN).
All LGHMS-Series Master Puller Sets include an LGH-Series Puller, a Cross Puller, a Bearing Separator, a Bearing Cup Puller, a detachable Hollow Cylinder, a hose, a gauge and a pump
LGH-Series Pullers provide the same safety and ease of use as their mechanical counterparts, with the pulling force applied by a standard 700 bar hydraulic cylinder.
Quickly and easily mount on a wide range of applications
Hydraulically applied pulling force increases pulling capacity, reducing operator fatigue
Lock-on jaws offer a secure grip for safe and easy operation
Synchronous jaw movement enables entire pulling job to be performed by a single operator
LGH-Series Pullers MUST be used with a point protector if the shaft end does not contain a drilled center hole. One point protector is included with every puller.
Enerpac cylinders and pumps can be operated to 700 bar, but should not be operated past 350 bar when using the Cross Bearing Puller Set tools.
Always wear safety goggles and gloves while using pullers.
WARNING! Enerpac hydraulic pullers can be operated upto 700 bar. When using accessories, hydraulic pressure for this puller MUST BE
LIMITED to maximum capacities of 7 US-ton (75 kN).
All LGHMS-Series Master Puller Sets include an LGH-Series Puller, a Cross Puller, a Bearing Separator, a Bearing Cup Puller, a detachable Hollow Cylinder, a hose, a gauge and a pump
LGH-Series Pullers provide the same safety and ease of use as their mechanical counterparts, with the pulling force applied by a standard 700 bar hydraulic cylinder.
Quickly and easily mount on a wide range of applications
Hydraulically applied pulling force increases pulling capacity, reducing operator fatigue
Lock-on jaws offer a secure grip for safe and easy operation
Synchronous jaw movement enables entire pulling job to be performed by a single operator
LGH-Series Pullers MUST be used with a point protector if the shaft end does not contain a drilled center hole. One point protector is included with every puller.
Enerpac cylinders and pumps can be operated to 700 bar, but should not be operated past 350 bar when using the Cross Bearing Puller Set tools.
Always wear safety goggles and gloves while using pullers.
WARNING! Enerpac hydraulic pullers can be operated upto 700 bar. When using accessories, hydraulic pressure for this puller MUST BE
LIMITED to maximum capacities of 7 US-ton (75 kN).
All LGHMS-Series Master Puller Sets include an LGH-Series Puller, a Cross Puller, a Bearing Separator, a Bearing Cup Puller, a detachable Hollow Cylinder, a hose, a gauge and a pump
LGH-Series Pullers provide the same safety and ease of use as their mechanical counterparts, with the pulling force applied by a standard 700 bar hydraulic cylinder.
Quickly and easily mount on a wide range of applications
Hydraulically applied pulling force increases pulling capacity, reducing operator fatigue
Lock-on jaws offer a secure grip for safe and easy operation
Synchronous jaw movement enables entire pulling job to be performed by a single operator
LGH-Series Pullers MUST be used with a point protector if the shaft end does not contain a drilled center hole. One point protector is included with every puller.
Enerpac cylinders and pumps can be operated to 700 bar, but should not be operated past 350 bar when using the Cross Bearing Puller Set tools.
Always wear safety goggles and gloves while using pullers.
WARNING! Enerpac hydraulic pullers can be operated upto 700 bar. When using accessories, hydraulic pressure for this puller MUST BE
LIMITED to maximum capacities of 7 US-ton (75 kN).
All LGHMS-Series Master Puller Sets include an LGH-Series Puller, a Cross Puller, a Bearing Separator, a Bearing Cup Puller, a detachable Hollow Cylinder, a hose, a gauge and a pump
LGH-Series Pullers provide the same safety and ease of use as their mechanical counterparts, with the pulling force applied by a standard 700 bar hydraulic cylinder.
Quickly and easily mount on a wide range of applications
Hydraulically applied pulling force increases pulling capacity, reducing operator fatigue
Lock-on jaws offer a secure grip for safe and easy operation
Synchronous jaw movement enables entire pulling job to be performed by a single operator
LGH-Series Pullers MUST be used with a point protector if the shaft end does not contain a drilled center hole. One point protector is included with every puller.
Enerpac cylinders and pumps can be operated to 700 bar, but should not be operated past 350 bar when using the Cross Bearing Puller Set tools.
Always wear safety goggles and gloves while using pullers.
WARNING! Enerpac hydraulic pullers can be operated upto 700 bar. When using accessories, hydraulic pressure for this puller MUST BE
LIMITED to maximum capacities of 7 US-ton (75 kN).